Replacing convertible notebook components
28
Replacing the keyboard
Tools you need to complete this task:
v
Screws removed during this task:
To replace the keyboard:
1 Complete the steps in “Preparing the convertible notebook” on page 5.
2 Remove the two bottom keyboard screws.
3 Remove the keyboard cover by following the steps in “Replacing the keyboard cover” on
page 27.
Tip
The screw holes are marked with a K.
Flat-blade driver Scribe or non-marring tool- OR -
Phillips #0 screwdriver
2 black 2.5*8.0
(Keyboard)
Screw
Screw
To Next Page
Loading...
