16
Using Your LE500 Monitor
Color is not uniform
Make sure the monitor warms up for at least 30 minutes before making a final judgment
about color uniformity.
Make sure that:
n
Non-shielded speakers are not placed too close to the monitor.
n
The monitor is not positioned too close to another monitor, electric fan, fluorescent
light, metal shelf, or laser printer.
n
You demagnetize the screen using the degauss feature in the OSD.
Image is not sized or centered properly
Use the size and center controls to adjust the image. See the “Adjusting display settings”
section in this guide for information about the OSD control system.
Image cannot be adjusted full screen
Some video modes used by your monitor produce images that cannot be adjusted all the
way out to the bezel edge (the edge where the screen glass and monitor casing meet).
This condition does
not
indicate that the monitor is defective.
To Next Page
Loading...
Need help?
General
