6
Using Your LE500 Monitor
Starting the monitor
To start the monitor:
1
Press the power button once. The power LED lights and the monitor demagnetizes
itself for about five seconds.
2
Turn on the computer.
3
Once the system is running, the power LED on the monitor should be green. If not,
check the connections. For troubleshooting information, see the “Troubleshooting”
section of this guide.
4
Adjust the controls to get the best picture. Experiment with the display settings to
choose the ideal image size and position for you. See the “Adjusting display settings”
section in this guide for information about changing your display.
Caution
Do not store tapes or diskettes next to the monitor because
the monitor generates a strong magnetic field during
startup. This field can erase or damage data stored on
magnetic tapes or diskettes.
To Next Page
Loading...
Need help?
General
