Replacing Gateway Notebook Components www.gateway.com
46
12 If you are replacing the LCD panel into an existing lid and you need to
transfer the existing LCD panel inverter to the new panel, unplug both
cables from the inverter, then plug them into the new LCD panel.
13 Place the new LCD panel into the existing LCD panel assembly lid.
-OR-
Place the existing LCD panel into the new LCD panel assembly lid.
14 Replace the six screws removed in Step 10.
15 Replace the bracket, then replace the two screws removed in Step 9.
16 Press the two halves of the LCD panel front and back together in several
places until they click in place. You should find no loose spots or spots
where the two halves do not meet.
To Next Page
Loading...
