Replacing the CMOS battery
www.gateway.com
33
Replacing the CMOS battery
Tools you need to complete this task:
Screws removed during this task:
To replace the CMOS battery:
1 Complete the steps in “Preparing the notebook” on page 5.
2 Remove the keyboard cover by following the instructions in “Replacing
the keyboard cover” on page 26.
Tips & Tricks
You do not need to unplug the keyboard
from the notebook.
3 Open the keyboard compartment by following the instructions in
“Replacing the keyboard” on page 28.
4 Locate the old battery on the system board.
Flat-blade driver Scribe or non-marring tool- OR -
Phillips #0 screwdriver
1-3 black (keyboard)
2 black (keyboard cover)
To Next Page
Loading...
