Once the Function is selected, enter the value by
pressing the Up or Down arrow keys.
1. Press the Set button once to access the
Functions. Use the Up or Down arrows to
scroll through the Functions.
2. When the desired Function is highlighted on the
LCD, press the Enter button again.
• The value is highlighted.
Figure 22. Value to Change
3. Press the Up or Down arrow keys to change
the value.
• Each time the arrow key is pressed the
changed value is displayed.
4. Press Enter when your desired value is shown.
01
12.50
00.00 00.00 00.00
00.00
00.00
5.258.75
05 06
02
07
03
08
04
24
Behind blade program
Figure 23. Value Highlighted
To Next Page
Loading...
Need help?
General
