To Next PageTo Next Page
Need help?Do you have a question about the GBG Granitore 1 and is the answer not in the manual?
General| Brand | GBG |
|---|---|
| Model | Granitore 1 |
| Category | Kitchen Appliances |
| Language | English |
Manufacturer details are shown on the identification plate.
Defines user and specialized technician roles for machine operation and safety.
Explains manual purpose, audience, keeping, and hazard symbols.
Machine is for slush drinks and cold beverages, requires specific product mix.
Lists and illustrates key components like bowl, lid, control panel, and dispenser.
Lists dimensions, weight, electrical specs, operating temp, and sound level.
Details commands like main switch, mixing switch, refrigeration switch, and thermostat.
Covers electrical connection, cord handling, prohibited uses, and maintenance safety.
Machine shutdown procedure via main switch.
Warning against removing or damaging machine plates and labels.
Details machine packaging, dimensions, and weight.
Instructions for safe lifting, moving, and transporting the machine.
Guidelines for cleaning, storing, and protecting the machine during periods of inactivity.
Mentions Vaseline for lubrication of parts after washing.
Requirements for site preparation, surface, lighting, ventilation, and clearance.
Instructions for separating and disposing of packaging materials according to regulations.
Procedures for safe electrical connection by specialized technicians.
Instructions on how to prepare and pour the product into the bowl.
Step-by-step guide to powering on and operating the machine.
Instructions for operating a single-tank model with electronic thermostat.
Instructions for operating multi-tank models with electronic thermostat.
How to adjust the granita's thickness using a screw.
Procedure for dispensing the beverage by pulling the tap lever.
Instructions for emptying the tanks before cleaning.
Steps to disassemble the tap for cleaning, including pin removal.
Procedures for safely removing bowls and lids for cleaning and sanitization.
Detailed steps for washing and sanitizing disassembled parts using solution and water.
Guidance on reassembling cleaned parts, including lubrication with Vaseline.
Steps for performing a rinsing cycle with clean water before startup.
Daily procedure for emptying and cleaning the drip tray.
Instructions for specialized technicians to clean the condenser.
Steps for removing guards and cleaning the condenser for a single-tank unit.
Steps for cleaning the condenser on multi-tank units.
