Need help?Do you have a question about the GCAN GCAN-PLC-510 and is the answer not in the manual?
Provides a general overview of the GCAN-PLC-510, its features, and capabilities.
Details the key performance specifications and features of the GCAN-PLC-510 controller.
Explains how the GCAN-PLC-510 can be used to form a complete programmable control node.
Describes the physical appearance of the GCAN-PLC-510, including communication and I/O interfaces.
Explains the method for installing and securing the GCAN-PLC-510 on a guide rail.
Provides instructions on how to perform power wiring using a flat-blade screwdriver.
Details the definitions for RS232, RS485, and CAN bus interfaces on the GCAN-PLC-510.
Explains the meaning and function of the status indicators on the GCAN-PLC-510.
Explains how to connect the GCAN-PLC-510 using its standard serial port (RS232).
Details how to connect the GCAN-PLC-510 to a CAN-Bus network, including terminal resistance.
Explains the importance and method of adding CAN-Bus terminal resistance for reliable communication.
Details the kernel refresh interface, including the USB interface, run/stop switch, and reset button.
Explains the function of the program running switch and reset button for controlling PLC operation and restoring factory settings.
Provides the download address for the OpenPCS programming software.
Illustrates and describes the main components of the OpenPCS programming interface.
Guides on creating projects, writing programs, and downloading them to the PLC.
Details the steps to create a new project within the OpenPCS software.
Explains how to add program files, such as ST language programs, to an OpenPCS project.
Provides guidance on defining variables and writing routines in ST language within OpenPCS.
Describes how to establish a debug connection from OpenPCS to the PLC.
Covers building the project and downloading the compiled program to the GCAN-PLC controller.
General| Model | GCAN-PLC-510 |
|---|---|
| Category | Controller |
| Digital Input Channels | 16 |
| Digital Output Channels | 16 |
| Analog Input Channels | 4 |
| Analog Output Channels | 2 |
| Input Voltage | 24V DC |
| Operating Temperature | -20°C to 60°C |
| Storage Temperature | -40°C to 85°C |
| Protection Level | IP20 |
| Weight | 0.5 kg |
| Operating System | RTOS |
| Programming Language | C |
| Communication Interfaces | CAN, RS485, Ethernet |
| Humidity | 5% to 95% (non-condensing) |
| CAN Baud Rate | 1 Mbps |
To Next Page