GE Security Concord 4 User Manual

To change the system time:
 Press [9] + [Master code] + [0] + [2] + [0].
 Enter the current time in 24-hour format, i.e., 1630 for 4:30pm, then press [#].
 Press [*] + [0] + [0] + [#] to exit.
Chimes and Beeps
When your system is in chime mode, a chime alert will sound three tones whenever a protected door/window
is opened.
 To turn chime mode on and off, press [7] + [1].
Reset
 To clear the display after an alarm event, enter the sequence [1] + [security code] twice or enter [1] +
[security code] + [*].
Security Codes
You can program up to 230 users, each with their own level of security.
 To add a new user, press [9] + [Master code] + [0] + [3] + [0] + [desired user number, i.e., 27 for user
27].
 Enter the desired user 4-digit code + [#].
 Press [*] + [0] + [0] + [#] to exit the menu.
 To delete a user, press [9] + [Master code] + [0] + [3] + [0].
 Enter the user number you wish to delete + [0] + [Master code] + [#].
 Press [*] + [0] + [0] + [#] to exit the menu.
New users can be assigned attributes, which define what actions users can and cannot perform. For a
complete list of user attributes, please see the Concord 4 system manual.
Trouble Conditions
Trouble conditions are issues that require your attention and are indicated by rapid beeps sounding every
minute until the Trouble Condition is corrected.
 To silence the Trouble Condition beeping, press [* Status].

GE Security Concord 4 Specifications

General

Brand	GE Security
Model	Concord 4
Category	Security System
Language	English