GE 21091 User Manual

25
Make sure your handset or base is in menu mode. Make sure your phone
is OFF (not in TALK mode).
1. Press the cid/vol ( or ) button on the handset or CID/messages
( or ) button on the base to scroll to DEFAULT SETTING .
2. Press the OK soft key and then use the touch-tone pad on your handset
or base to enter 1YES or 2NO , or use the cid/vol ( or ) button on your
handset or the CID/messages ( or ) button on your base to scroll to
your selection. 2NO is the default setting.
NOTE: If you choose YES all settings in the programmable menu return to the
factory default settings.
NOTE: Press the EXIT soft key once to keep the previous setting and return to
the main menu.
3. Press the OK soft key to save your selection, and return to the main
menu. The default setting you choose shows on the display for two
seconds.
HANDSET & BASE DISPLAY HANDSET & BASE DISPLAY
DEFAULT SETTING
LANGUAGE
EXIT
OK
DEFAULT SETTING
1 YES 2NO
EXIT
OK
DEFAULT SETTING
LANGUAGE
EXIT
OK
DEFAULT SETTING
NO

GE 21091 Specifications

General

Brand	GE
Model	21091
Category	Telephone
Language	English