34
you call your bank you may need to enter your account number. Using the
temporary tone feature allows you to temporarily switch to touch tone
mode so you can enter and send your number.
1. Dial the telephone number and wait for the line to connect.
2. When your call is answered, press the *tone button on your handset
number pad to temporarily change from pulse dialing to tone dialing.
3. Follow the automated instructions to get the information you need.
4. Hang up the handset and the phone automatically returns to pulse
(rotary) dialing mode.
CORDLESS HANDSET VOLUME CONTROL
When the cordless handset is ON (in TALK mode) adjust the receiver
volume by pressing the cid/vol ( or ) button on the cordless handset.
There are four volume levels, and each press of the cid/vol ( or ) button
adjusts the receiver volume by one level.
SPEAKERPHONE/ANSWERING SYSTEM VOLUME CONTROL
When the speakerphone is ON, adjust the volume by pressing the ( or )
buttons on the base. There are eight volume levels, and each press of the
volume button adjusts the speaker volume by one level.
NOTE: You may also adjust the volume during walkie talkie mode, intercom
mode, and conference mode.
INTERCOM
The intercom feature allows you to have an unlimited-duration, two-way
conversation between two handsets or the base and a handset.
MAKING AN INTERCOM CALL
1. Make sure the phone is OFF (not in TALK mode).
2. Press the page/int button on the handset or base.
PAGING EXTENSION
shows in the display.
To Next Page
Loading...
