64
Dial tone is OK but can’t dial out
• Make sure the TONE/PULSE setting on the base is set to the type of
phone service you are subscribed to.
Handset/Base does not ring
• Make sure the handset ringer setting is on and the base ringer is
programmed to HI.
• The cordless handset may be out of range of the base. Move closer to
the base.
•You may have too many extension phones on your line. Try unplugging
some phones.
• Check for dial tone.
• Is the handset Walkie Talkie enabled?
You experience static, noise, or fading in and out
• The cordless handset may be out of range of the base. Move closer to
the base.
•Relocate the base. Make sure base is not plugged into an outlet with
another household appliance.
• Charge the battery.
Unit beeps
• Place the handset in the cradle for 20 seconds. If it still beeps, charge
battery for 12 hours.
• Clean charging contacts on cordless handset and base/charge cradle
with a soft cloth or an eraser.
•See solutions for “No dial tone”.
•Replace the battery.
To Next Page
Loading...
