GE 21878 - Organizing Contacts and Speed Dial; Emergency Call and Area Code

26
[SKL] button to save the number. The following procedure is as same as above. User can also save number into phone book
through call log (refer to chapter “Call Log Operation”).
Group in Phone book
z Press or key to choose the selection [Group] through the submenu [Phone Book].
z Press [SKL] button.
z Press
or key to select one of the groups.
z Press [SKL] button to access the group.
z Press
or key to choose the selection [View], [Edit Name].
z Press [SKL] button to view the details of the group or edit the group name .
Note: When view the details of the group, user can edit the name and number in the group, and change the group and delete
entries.
Speed Dial
z Press or key to choose the selection [Speed Dial] through the submenu [Phone Book].
z Press [SKL] button.
z Press
or key to choose the speed dial key (key 1 to key 9).
z Press [SKL] button to confirm.
z Press
or key to choose the selection [Phone Book] or [Delete].
z Press [SKL] button to confirm the selection.
z In the selection [Phone Book], Press
or key to choose a number to set as speed dial number.
z Press [SKL] button to confirm the setting.
z In the selection [Delete], press [SKL] to delete the speed dial number.
z To dial the defined speed dial number, press and hold the corresponding speed dial key in standby mode until the dial
number appears on the LCD.
Check Phone Book
z Press or key to choose the selection [Check] through the submenu [Phone Book].
z Press [SKL] button to view the used memories and total memories.
Emergency Call
z Press or key to choose the selection [Emergency Call] through the submenu [Phone Book].
z Press [SKL] button.
z Press
or key to select the location of the emergency call.
z Press [SKL] button.
z Enter the emergency call number.
z Press [SKL] button to confirm the setting.
Note: The emergency call number can be edited and dialed out even when keypad is locked.
Area Code
z Press SKL in standby mode to view the submenus in [Phone Book]
z Press 【▲】/【▼】 to select menu [Area Code].
z Press SKL, then input the digits, and press SKL again to confirm.(Max. 5 digits)
z The area code can also be edited just as the above procedure.