GE 21878 - Walkie Talkie Operation; Timer; Setting Date;Time and Alarm

32
Guess Number
z Press or key to choose the selection [Game] through the submenu [Function]
z Press [SKL] button to confirm.
z Press
or key to choose the selection [Guess Number]
z Press [SKL] button to confirm.
z Enter [Start Game] to start the game;
Enter [Level] to choose difficulty levels, use
or key to choose from [High], [Medium], [Low] levels and press [SKL]
to confirm, [SKR] to cancel setting;
Enter [Highest Score] to view historic highest score. It will be clear after power off;
Enter [Help] to get operation helps for this game;
Walkie Talkie
z Press or key to choose the selection [Walkie Talkie] through the submenu [Function].
z Press [SKL] button.
z Press
or key to select [Enable].
z Press [SKL] button to confirm the selection.
z Enter the group ID.
z Press [SKL] button.
z Enter the WT ID (walkie-talkie ID).
z Press [SKL] button to activate walkie-talkie function.
Or
z Press
or key to select [Disable].
z Press [SKL] button to deactivate walkie-talkie function.
Note:
1. Press , or [INT] key, then press a digit for a WT ID, the called party will ring (internal ring) and the calling WT ID
will highlight;
2. The called party press
button to accept the calling WT, then the calling party and the called party can communicate;
3. The called party can press [SKR] or
key to reject the calling WT; during communication, the called party or the calling
party can press [SKR] or
key to end the communication;
4. Press
, or [INT] key, then press [*] key, all the other handsets in the same group will ring and display the calling
WT ID; 5. If walkie-talkie is not disabled, user can press
/ / [INT] key and then WT ID of other handsets in standby
mode to call the corresponding handsets in the same group.
Timer
Set Date/Time
z Press or key to choose the selection [Clock] through the submenu [Timer].
z Press [SKL] button.
z Enter the date.
z Press [SKL] button.
z Enter the time.
z Press [SKL] button to confirm the date/time setting.
Alarm
z Press or key to choose the selection [Alarm] through the submenu [Timer].