11
SETTINGS
Default Settings
Display Contrast 3
Time/Date 12 a.m. 1/01
Local Area Code – – –
Message Length 2 minutes
Rings to Answer 4
Security Code 123
Dialing Tone
Regional Area Codes – – –
You can customize the following settings to suit your
needs.
Display Contrast Selects the display
contrast.
Time/Date Sets the time and date.
Local Area Code Sets your local area code
for Dial Back.
Message Length Sets the length of time
allowed for
incoming messages.
Rings to Answer Selects the number of
rings before the unit
answers.
Remote Access Sets your 3-digit code used
for remote access to the
unit.
Dialing Sets the phone for tone or
pulse dialing.
Regional Area Codes Sets your regional area
codes if you have multiple
area codes where you live.
To Next Page
Loading...
