24
The unit waits for a remote command for 20 seconds
after the correct security code has been entered. Menu
selections can be made while the menu is playing.
NOTE: The unit answers on the 10th ring when it is
turned off or the memory is full. To access the
answerer, enter the 3-digit security code after the
beep. If memory is full, play messages and erase
some of them to restore memory.
NOTE: After the unit plays the remote menu, it
waits 20 seconds for a command, then disconnects.
REMOTE ACCESS COMMANDS
Play new messages 1
Play all messages 2
Repeat messages
(during message playback) 5
Play previous message
(during message playback) 6
Skip to next message
(during message playback) 7
Erase message (during message playback) 0
Stop playback (during message playback) 4
Turn answerer on/off 3
End call 4
To Next Page
Loading...
