GE A1035 - LCD Brightness; Power Saver

72
LCD Brightness
Use this setting to adjust the brightness of your LCD
screen.
1. Select the
LCD Brightness setting from the Setup
menu as described previously.
2. Use the
Up/Down buttons to select to Auto or
Manual brightness adjustment, and then press
to conrm your election.
3. For manual adjustment, use the Left/Right buttons
to adjust the brightness.
Power Saver
This setting allows you to save power and get the
maximum possible running time for your battery. Follow
the steps below to turn o the LCD screen and camera
automatically after a period of inactivity.
1. Select the
Power Save setting from the Setup
menu as described previously.
2. Use the
Up/Down navigation buttons to switch
between LCD power and Camera power elds.
3. Use the Left/Right navigation buttons to specify
the idle period before automatic power-o. The level
bars correspond to the following idle periods.