GE A1035 - Connecting to a PC

74
File Numbering
After capturing photos or videos, the camera will auto-
matically save the le with a numeric sux.
Select this
setting:
Serial number is derived and assigned
to a new le as follows:
Continue
whether the number should continue
on from the last photo you have taken
Reset
reset the counter to 1 and save les in a
new folder in the memory card.
Language
See “Setting the Language“ section on page 22.
Video system
Use this setting to determine your video system in the
current area.
1. Select the
Video system setting from the Setup
menu as described previously.
2. Use the
Up/Down navigation buttons to select
NTSC or PAL. Then press the button to conrm.
The video output signal can be switched to NTSC or
PAL to accommodate dierent regional standards. The
appropriate setting will vary between regions.