BLUETOOTH®
K0553 Revision D 100 [EN] English
Bluetooth®
Disclaimer: Due to individual country radio licensing requirements, Bluetooth® wireless tech-
nology may not be available in some countries. An up-to-date list of countries that the ADTS with
Bluetooth® wireless technology is licensed to be used in is available upon the request from GE.
Bluetooth® operations is normally enabled at point of manufacture, but can also be enabled after
sale (product option code ASTOUCH-36). For more details contact GE.
In order to obtain the best results when using Bluetooth® wireless technology it is important to
correctly position the base unit of the ADTS in a reliable coverage area with respect to the
aircraft.
Figure 3-42 gives an example of good base unit positioning, which should be:
• forward of a line level with the cockpit window
• a minimum of 1 m away from the fuselage edge
• a maximum of 8 m out from the nose wheel
• a position the top edge of the base unit nearest to the aircraft with the output ports facing
upwards.
To Next Page
Loading...
