GE AHC18 User Manual

10 49-5000445 Rev. 2
INSTALLATION INSTRUCTIONS
Installation Instructions
5. PREPARE WINDOW FOR
INSTALLATION
A. Measure the width of the window opening.
B. Mark the center line on the inside windowsill.
C. Apply the weather seals provided to the bottom,
top and sides of the window to the seal around
the perimeter of the air conditioner.
4. PREPARE THE CASE
NOTE: Attach curtains to the air conditioner before
placing the air conditioner in the window.
A. Install top mounting rail (if not already installed)
with four type A screws.
B. Slide left-hand curtain assembly into left end of
top and bottom mounting rail. Repeat for right
hand curtain assembly.
C. Fasten curtain retainer strips to the sides of the
outer case with four type A screws on each side.
KROHV8VHW\SH%VFUHZVWRVHFXUHWKHVLGH
panels in place.
´6HOI7DSSLQJ
Screws
´6HOI7DSSLQJ
Screws
Top Channel
Side Curtains
B
A
A. Width of window opening
B. Center line
Cut and apply
weather strip to
front and bottom
edge of window
frame.
Cut and apply
weather strip to
back edge of
the window sill.
Cut and apply
a weather strip
to side of the
curtain frame
(one on each
side).

GE AHC18 Specifications

General

Brand	GE
Model	AHC18
Category	Air Conditioner
Language	English