EasyManuals Logo

GE ASH220NCDW Installation Instructions

GE ASH220NCDW
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
2 31-5000275 Rev. 5
Installation Instructions
Operating Range
ASH220NCDW* Cooling: 14°F -115°F
ASH324NCDW* Heating: -15°F – 75°F
ASH436NCDW*
ASH218JCDS* Cooling: 14°F-115°F
ASH324JCDS* Heating: -4°F-75°F
ASH436JCDS*
NOTES:
When the outdoor temperature drops below -22°F
(-30°C), the unit will stop running. The unit will turn
back on automatically when the temperature rises
above the lowest limit.
It is recommended to have a secondary heating
source(s) available in case the temperature drops
below the operating range.
Record Keeping
Thank you for purchasing this GE Appliances product.
This installation manual will help you get the best
performance from your new heat pump.
For future reference, record the model and serial number
located on the label on the side of your heat pump, and
the date of purchase.
Staple your proof of purchase to this manual to aid in
obtaining warranty service if needed.
To register your new GE Appliances Duct Free system go
to GEAppliances.com/ductless and input the model/serial
number information on this page. To receive a 10-year
compressor and parts warranty, registration is required
within 60 days of installation.
____________________________________
Model number
____________________________________
Serial number
____________________________________
Date of purchase

Other manuals for GE ASH220NCDW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE ASH220NCDW and is the answer not in the manual?

GE ASH220NCDW Specifications

General IconGeneral
BrandGE
ModelASH220NCDW
CategoryHeat Pump
LanguageEnglish

Related product manuals