GE Multilin C60 Breaker Protection System 2-5
2 PRODUCT DESCRIPTION 2.1 INTRODUCTION
2
CYBERSENTRY USER ROLES
CyberSentry user roles (Administrator, Engineer, Operator, Supervisor, Observer) limit the levels of access to various UR
device functions. This means that the EnerVista software allows for access to functionality based on the user’s logged in
role.
Example: Administrative functions can be segmented away from common operator functions, or engineering type access,
all of which are defined by separate roles, as shown in the following figure, so that access of UR devices by multiple per-
sonnel within a substation is allowed.
Figure 2–2: CYBERSENTRY USER ROLES
The table lists the roles that are supported and their corresponding capabilities.
Table 2–3: PERMISSIONS BY USER ROLE FOR CYBERSENTRY
Roles Administrator Engineer Operator Supervisor Observer
Complete access Complete access
except for
CyberSentry
Security
Command
menu
Authorizes
writing
Default role
Device Definition RRRRR
Settings
|------------ Product Setup
|--------------- Security (CyberSentry) RW R R R R
|--------------- Supervisory see table notes R R see table notes R
|--------------- Display Properties RW RW R R R
|---------------
Clear relay records
(settings) RW RW R R R
|--------------- Communications RW RW R R R
|--------------- Modbus user map RW RW R R R
|--------------- Real Time Clock RW RW R R R
|--------------- Oscillography RW RW R R R
|--------------- Data Logger RW RW R R R
|--------------- Demand RW RW R R R
|---------------
User Programmable
LEDs RW RW R R R
|---------------
User Programmable
self test RW RW R R R
|--------------- Control Pushbuttons RW RW R R R
|---------------
User programmable
Pushbuttons RW RW R R R
|--------------- Flex states RW RW R R R
|---------------
User definable dis-
plays RW RW R R R
|--------------- Direct I/O RW RW R R R
842838A2.CDR
Administrator
Engineer
Supervisor
Operator
Observer