GE C60 User Manual

E-4 C60 Breaker Protection System GE Multilin
E.1 OVERVIEW APPENDIX E
E
Parameter in control direction
File transfer
Type identifier and cause of transmission assignments
(station-specific parameters)
In the following table:
•Shaded boxes are not required.
•Black boxes are not permitted in this companion standard.
•Blank boxes indicate functions or ASDU not used.
•‘X’ if only used in the standard direction
 <110> := Parameter of measured value, normalized value PE_ME_NA_1
 <111> := Parameter of measured value, scaled value PE_ME_NB_1
 <112> := Parameter of measured value, short floating point value PE_ME_NC_1
 <113> := Parameter activation PE_AC_NA_1
 <120> := File Ready F_FR_NA_1
 <121> := Section Ready F_SR_NA_1
 <122> := Call directory, select file, call file, call section F_SC_NA_1
 <123> := Last section, last segment F_LS_NA_1
 <124> := Ack file, ack section F_AF_NA_1
 <125> := Segment F_SG_NA_1
 <126> := Directory (blank or X, available only in monitor [standard] direction) C_CD_NA_1
TYPE IDENTIFICATION CAUSE OF TRANSMISSION
NO. MNEMONIC 12345678910111213
20
to
36
37
to
41
44 45 46 47
<1> M_SP_NA_1
X X XX X
<2> M_SP_TA_1
<3> M_DP_NA_1
<4> M_DP_TA_1
<5> M_ST_NA_1
<6> M_ST_TA_1
<7> M_BO_NA_1
<8> M_BO_TA_1
<9> M_ME_NA_1
PERIODIC, CYCLIC
BACKGROUND SCAN
SPONTANEOUS
INITIALIZED
REQUEST OR REQUESTED
ACTIVATION
ACTIVATION CONFIRMATION
DEACTIVATION
DEACTIVATION CONFIRMATION
ACTIVATION TERMINATION
RETURN INFO CAUSED BY LOCAL CMD
FILE TRANSFER
INTERROGATED BY GROUP <NUMBER>
REQUEST BY GROUP <N> COUNTER REQ
UNKNOWN TYPE IDENTIFICATION
UNKNOWN CAUSE OF TRANSMISSION
UNKNOWN COMMON ADDRESS OF ASDU
UNKNOWN INFORMATION OBJECT ADDR
UNKNOWN INFORMATION OBJECT ADDR

GE C60 Specifications

General

Brand	GE
Model	C60
Category	Relays
Language	English