GE C60

GE Multilin C60 Breaker Protection System F-3
APPENDIX F F.1 DEVICE PROFILE DOCUMENT
F
Reports Binary Input Change Events when no
specific variation requested:
 Never
 Only time-tagged
 Only non-time-tagged
 Configurable
Reports time-tagged Binary Input Change Events when no
specific variation requested:
 Never
 Binary Input Change With Time
 Binary Input Change With Relative Time
 Configurable (attach explanation)
Sends Unsolicited Responses:
 Never
 Configurable
 Only certain objects
 Sometimes (attach explanation)
 ENABLE/DISABLE unsolicited Function
codes supported
Sends Static Data in Unsolicited Responses:
 Never
 When Device Restarts
 When Status Flags Change
No other options are permitted.
Default Counter Object/Variation:
 No Counters Reported
 Configurable (attach explanation)
 Default Object: 20
Default Variation: 1
 Point-by-point list attached
Counters Roll Over at:
 No Counters Reported
 Configurable (attach explanation)
 16 Bits (Counter 8)
 32 Bits (Counters 0 to 7, 9)
 Other Value: _____
 Point-by-point list attached
Sends Multi-Fragment Responses:
 Yes
 No
Table F–1: DNP V3.00 DEVICE PROFILE (Sheet 3 of 3)