GE C60 User Manual

3-8 C60 Breaker Protection System GE Multilin
3.1 DESCRIPTION 3 HARDWARE
3
The torque used to connect the terminal blocks to the back of the relay chassis (screws a, b, c shown) is 9 inch-pounds. For
the connections to the terminal blocks (rows 1 to 8), use a minimum of 17 inch-pounds. During manufacturing, the power
supply and CPU modules are installed in slots B and D of the chassis with 13 inch-pounds of torque on the screws at the
top and bottom of the modules.

GE C60 Specifications

General

Brand	GE
Model	C60
Category	Relays
Language	English