GE CRxFlex - Configuration

CRxFlex Operating Manual V1.1 7
Configuration
The system consists of:
1 The CRxFlex Digitizer including the accessory kit.
2 Cassette in different sizes with image plate. Following image plate types are
available:
 IPS for CRxFlex
 IPC2 for CRxFlex
 IPU for CRxFlex
3 Workstation for image processing and identification.
WARNING: Accessory equipment not complying with the safety requirements
of this product may lead to a safety hazard. In particular, the power cord may
not be replaced by an insufficient dimensioned cable.
The data transmission is performed via network.
Two configurations are possible:
1 Via local network (preferred)
2 Via network switch connection
Digitizer
Cassette
Processing Workstation