You Got This!
And we’re here to help.
For in-depth instructional videos and
a guided tour through the installation,
go to gelighting.com/cync.
NOTE: Please make sure your system is up-to-date, and you
update the firmware when prompted for the best experience.
BEFORE YOU DO ANYTHING!
Turn Off the Power!
STEP 1
Turn off the power for the switch
location at the circuit breaker box.
STEP 2
Test existing switch by toggling switch
on/off, ensuring lights do not turn on.
STEP 3
Now, follow these setup steps for a
single gang switch.
ON OFF
To Next Page
Loading...
