K319 Issue 2 EN-3
English
Screens to work with
The TRX-II has four types of screen display to work with:
• Menu Selection Screen ( )
Offers selection of choices. Move cursor with arrow keys to your
choice.
• Set-up Screen ( )
Move cursor with arrow keys to fill in the blanks.
• Working Screen ( )
Displays readings of measured and generated values. Source or
simulated temperatures are set with the numerical key-pad or
can be ramped up and down in different ways.
•Help Screen
Your guide, available in many operational situations. Press INFO
to call a Help screen.
Note:
After switching the calibrator on, the
display screen will be as shown (left)
• Battery type
• Battery voltage
• TRX-II Serial No
• EPROM versions installed
•DATE / TIME
• Days left to next calibration
Keys to work with ( )
• The EXE key
Pressing this key will execute choices or source level
adjustments.
• The CE key
Press to cancel your previous key operation or to correct a typing
error.
• The NUMERICAL key-pad
Used to dial source levels or simulated temperatures. Also used
to fill out levels and time settings for special functions.
• The ARROW keys
Moves the cursor position and ramps source levels up or down.
• The # key
Used in combination with other keys for special functions. Press
# first and hold, while pressing the next key:
# + Numerical key 1-9
Stores key-pad operations (Keystroking).
# + CE
Returns directly to the Main Menu.
To Next Page
Loading...
