GE G5 User Manual

66 6767
If the USB option is set to [PC] :
Turn the camera o and disconnect the USB cable.
If the USB option is set to [PC (PTP) ] :
Remove the camera from the system as described below
before turning the camera o and disconnecting the USB
cable.
By using the USB cable, you can transfer the captured photos
and videos to a PC. Follow the steps below to connect the
camera to a PC.
1. Start a computer to which ArcSoft software has been
installed.
2. Make sure both the camera and PC are turned on.
3. Connect one end of the supplied USB cable to the USB/AV
OUT port on your camera.
4. Connect the other end of the cable to an available USB
port on your PC.
5. Disconnect the camera once transfer is completed.

GE G5 Specifications

General

Sensor Type	CCD
LCD Resolution	130, 000 pixels
Sensor Resolution	5.0 MP
Screen Size	1.8 in
Effective Pixels	5.0 MP
Aperture Range	f/2.8 - f/4.9
Focus Range	50 cm - infinity (Normal), 5 cm - 50 cm (Macro)
ISO Sensitivity	Auto, 100, 200, 400
LCD Screen Size	1.8 in
Storage Media	SD Card
Interface	USB