How to stop my GE GPT225 from beeping at the end of the cycle?
- SShannon WadeAug 30, 2025
The beeping at the end of the cycle is normal. The dishwasher will beep (unless interrupted) and the Clean light will display at the end of the wash cycle.

How to stop my GE GPT225 from beeping at the end of the cycle?
The beeping at the end of the cycle is normal. The dishwasher will beep (unless interrupted) and the Clean light will display at the end of the wash cycle.
What to do if water won’t pump out of the tub of my GE GPT225 Dishwasher?
If water won't pump out, the drain may be clogged. If you have an air gap, clean it (see the Care and cleaning section). If the dishwasher drains into a disposer, run disposer clear. Check to see if your kitchen sink is draining well. If not, you may need a plumber.
Why does my GE GPT225 Dishwasher BEEPS once every minute?
This is a reminder that your dishwasher door has been left open during operation. It will continue beeping until you press Start and close the door.
How to fix black or gray marks on dishes in my GE Dishwasher?
These marks usually appear because aluminum utensils have rubbed against the dishes. Remove the marks with a mild, abrasive cleaner.
What noises are normal for a GE GPT225?
Normal operating sounds include beeping at the end of the cycle, the detergent cup opening, water entering the dishwasher, the motor stopping and starting at various times during the cycle, the spray arms starting and stopping at various times, drain pump sounds during pump out, and the drain pump starting and stopping several times during each drain. These are all normal. If you hear rattling dishes when the spray arm rotates, make sure dishes are properly loaded. If you hear rattling silverware against the door during the wash, tall utensils may be placed in the upper rack to avoid bumping against the inner door during the wash cycle.
What causes noise in my GE Dishwasher?
Normal operating sounds include beeping at the end of the cycle, the detergent cup opening, water entering the dishwasher, the motor stopping and starting, the spray arms starting and stopping, and drain pump sounds. If dishes are rattling, make sure they are properly loaded (see the Loading section). If silverware is rattling against the door, place tall utensils in the upper rack.
What to do if the control panel responds but my GE GPT225 never fills with water?
If the control panel of your GE Dishwasher responds to inputs but the dishwasher never fills with water, make sure the door is firmly closed. Also, make sure the water valve (usually located under the sink) is turned on.
Why does my GE Dishwasher beep once every minute?
If your GE Dishwasher BEEPS once every minute, this is a reminder that your dishwasher door has been left open during operation. Press Start and close the door.
Why is water standing in the bottom of my GE GPT225 Dishwasher (Built-In Models Only)?
If water is standing in the bottom of the tub of your GE Dishwasher (Built-In Models Only), the air gap may be clogged, so clean the air gap. If a high drain loop or air gap is not installed, refer to the Installation Instructions for proper drain line installation.
Why won’t water pump out of my GE GPT225 Dishwasher?
If water won’t pump out of your GE Dishwasher tub, the drain might be clogged. If you have an air gap, clean it. If the dishwasher drains into a disposer, run the disposer to clear it. Check to see if your kitchen sink is draining well; if not, you may need a plumber.
| Type | Built-In |
|---|---|
| Capacity | 16 place settings |
| Drying System | Heated Dry |
| Width | 24 inches |
| Energy Star Certified | Yes |
| Control Type | Electronic |
| Color | Stainless Steel |
| Depth | 24 inches |
| Features | Delay Start, Sanitize Cycle |
Guidelines for safe installation and maintenance practices for the dishwasher.
Essential safety steps and precautions for operating the dishwasher correctly.
Covers water heater safety, child entrapment, proper disposal, and electrical requirements.
Initial setup, loading, and choosing wash cycles and options.
Procedures for starting, pausing, canceling cycles, and using special modes.
Instructions for filling and using the detergent and rinse agent dispensers.
Instructions for loading upper rack, lower rack, and silverware basket.
Steps for installing casters, faucet adapter, and connecting/disconnecting.
Procedures for cleaning control panel, door panels, and dishwasher interior.
Instructions for cleaning the upper spray head and removing/cleaning spray arms.
Steps for inspecting and cleaning the filter assembly.
Guidance on protecting the dishwasher from freezing in unheated areas.
Solutions for problems like flashing lights, beeping, and unclean dishes.
Addressing issues like spots on glassware and white film on dishes.
Troubleshooting when the dishwasher won't run or fill with water.
Resolving problems with water not pumping out and normal operating noises.
Loading...