Page 15
17996 Rev5, August 2013
3 GENERAL WARNINGS
1. Do not separate the Hydran 201Ti Intelligent Transmitters from their
respective Hydran 201 sensor. The H201Ti is set at the factory for a specific
H201 sensor. To verify whether the two components are paired correctly,
consult the serial numbers indicated on the shipping box and/or the Test
Certificate and Data Sheet. The sensor’s serial number is located below the
connector (see Figure 4 below); while the H201Ti’s serial number is located at
the back of the heating plate (see Figure 5).
Figure 4: Hydran 201 Sensor and Protective Cap
To Next Page
Loading...
