Why does the "LOCK DOOR" flash in the display of my GE JB860 Oven?
If you see "LOCK DOOR" flashing on your GE oven display, it means the self-clean cycle has been selected, but the door is not closed. Ensure the oven door is fully closed to start the cleaning cycle.
Why do the clock and timer not work on my GE oven?
If the clock and timer on your GE range do not work, check whether a fuse in your home may be blown or the circuit breaker tripped and replace the fuse or reset the circuit breaker. Also, make sure electrical plug is plugged into a live, properly grounded outlet. Ensure that the oven controls are properly set.
Why does food not bake properly in my GE JB860 Oven?
If food isn't baking properly in your GE oven, it could be due to several factors. Ensure the oven controls are set correctly. Check that the rack position is correct and level. Use the correct cookware of the proper size. The oven temperature might need adjustment. Also, substituting ingredients can change the recipe outcome.
Why doesn't the oven light work in my GE oven?
If your GE oven light does not work, first, check if the light bulb is loose or defective. Tighten or replace the bulb. If the pad operating the light is broken, call for service.
Why does my GE JB860 door glass appear to be "tinted" or have a "rainbow" color?
If your oven door glass appears to be "tinted" or have a "rainbow" color, this is normal. The inner oven glass is coated with a heat barrier to reflect the heat back into the oven to prevent heat loss and keep the outer door cool while baking. Under certain light or angles, you may see this tint or rainbow color.
What to do during power outage when clock flashes on my GE Ranges?
After a power outage, when the clock flashes, reset the clock. If the oven was in use during the outage, you'll need to press the Cancel/Off pad, set the clock, and reset any cooking functions.
Why is there steam from the vent of my GE Ranges?
Seeing steam coming from the oven vent during use is normal. The amount of visible steam increases with the number of racks or the amount of food being cooked.
What to do if surface units of my GE Ranges do not work properly?
If the surface units are not working, first check your home's fuse box or circuit breaker and replace the fuse or reset the breaker if needed. Also, verify that the cooktop controls are correctly set for the specific surface unit you're using.
Why is there excessive smoking during broiling in my GE oven?
If you're experiencing excessive smoking during broiling in your GE oven, it's likely because the food is too close to the burner element. Lower the rack position of the food to increase the distance from the burner.
Why does my GE Oven does not work?
If your GE oven is not working or appears not to be working, there could be a few reasons. First, check if a fuse in your home has blown or if the circuit breaker has tripped and replace the fuse or reset the breaker. Also, ensure that the oven controls are properly set. Finally, check to verify that the oven is not in Sabbath Mode.
Essential safety guidelines for using the appliance, including warnings about flammable materials and general operation.
Covers safety instructions for fire prevention, cooktop usage, oven operation, and self-cleaning cycles.
Information on how to register your appliance, schedule service, and obtain customer support.
Instructions for operating both knob and knob-free surface units, including warming zones.
Details on double oven controls, special features, cooking modes, and Sabbath mode operation.
Guidelines for cleaning the range's exterior surfaces, including painted, stainless steel, and porcelain cooktops.
Procedures for cleaning the oven interior, self-cleaning function, and the glass cooktop surface.
To Next Page
General
