What to do if there is excessive smoking during clean cycle of my GE Ranges?
Excessive soil or grease can cause excessive smoking during the clean cycle. Press the Cancel/Off pad, open windows to ventilate the room, wait for the LOCKED light to turn off, wipe up the excess soil, and then reset the clean cycle.
What to do if there is excessive smoking during broiling with my GE Ranges?
If there is excessive smoking during broiling, the food might be too close to the burner element. Try lowering the rack position of the food.
What to do if my GE Ranges oven door will not open after a clean cycle?
If the oven door won't open after a clean cycle, the oven may still be too hot. Allow the oven to cool down below the locking temperature.
Why does "LOCK DOOR" flashes in the display of my GE Ranges?
The "LOCK DOOR" message flashes because the self-clean cycle has been selected, but the oven door isn't fully closed. Simply close the oven door to resolve this.
What to do if my GE Ranges display flashes?
If the display flashes, it indicates a power failure. Reset the clock.
Why is my GE Ranges surface unit stops glowing when turned to a lower setting?
When a surface unit stops glowing after being turned to a lower setting, it doesn't mean it's off. The unit is still on and hot, this is normal.
Why frequent cycling off and on of surface units of my GE Ranges?
Frequent cycling off and on of surface units can be caused by improper cookware. Use only flat cookware to minimize cycling.
How to fix GE surface units that will not maintain a rolling boil?
If the surface units on your GE cooktop aren't maintaining a rolling boil, or cooking isn't fast enough, it could be due to improper cookware. Use flat pans that match the diameter of the surface unit. In some areas, low power (voltage) can also be a factor. Covering the pan with a lid can help until the desired heat is reached.
What to do if GE surface units do not work properly?
If the surface units on your GE cooktop aren't working correctly, start by checking if a fuse in your home may be blown or the circuit breaker tripped, and replace the fuse or reset the circuit breaker. Also, make sure the cooktop controls are set correctly for the surface unit you're using.
Why doesn't my new GE oven cook like my old one?
If your new GE oven doesn't cook like your old one, it's because it has a different cooking system. For the first few uses, follow your recipe times and temperatures carefully. If you still think your new oven is too hot or too cold, you can adjust the temperature yourself to meet your specific cooking preference.
Essential safety guidelines for using the appliance, including warnings about flammable materials and general operation.
Covers safety instructions for fire prevention, cooktop usage, oven operation, and self-cleaning cycles.
Information on how to register your appliance, schedule service, and obtain customer support.
Instructions for operating both knob and knob-free surface units, including warming zones.
Details on double oven controls, special features, cooking modes, and Sabbath mode operation.
Guidelines for cleaning the range's exterior surfaces, including painted, stainless steel, and porcelain cooktops.
Procedures for cleaning the oven interior, self-cleaning function, and the glass cooktop surface.
To Next Page
General
