PROBLEM
OVEN WILL NOT
SELF-CLEAN
OVEN DOOR
WON’T LATCH
OVEN TEMPERATURE
TOO HOT OR TOO COLD
PROBLEM SOLVER
(continued)
POSSIBLE CAUSE
●
Automatic timer dials not set or
not
set properly. Clock must be set to time of
day and the STOP TIME dial must be set and advanced beyond the time noted
on oven clock.
●
The STOP TIME dial was not advanced for long enough.
●
Both OVEN SET and OVEN TEMP knobs must be set at CLEAN setting.
●
During the self-cleaning function, a thick pile of
spillover
in the oven can
leave a heavy layer of ash that can insulate the area from further heat.
●
Latch handle not moved to the right.
●
Oven may be too hot from previous use. Open oven door to cool oven. When
oven has cooled, latch handle can again be moved.
●
OVEN SET knob must be at CLEAN or OFF before latch handle can be moved.
●
OVEN TEMP knob needs adjustment. See Thermostat Adjustment section.
If you need more help... call, toll free:
GE Answer Center”
800.626.2000
consumer information service
30
—
To Next Page
Loading...
