GE JEB1090 User Manual

SENSOR POPCORN
m
Step 3: Touch SENSOR POPCORN pad.
NOTE: Do NOT use the metal shelf with the
}O.C~\ No need to touch START, the oven will
Sensor Popcorn program.
start immediately.
The Sensor Popcorn feature is designed to be used
only with prepackaged microwave popcorn weighing
3.0 to 3.5 ounces.
Step 1: Remove the outer wrapper from the
microwave popcorn.
After the popcorn sensor
E
detects steam, the oven “
=( l-l IL’
signals and displays
.
~ L( p~~~~
remaining cooking
COOK
time needed.
TIME
Step 2: Open oven door and place package of
Step 4: When cooking is
popcorn in the center of the oven floor as directed
by the package instructions. Close oven door.
completed, the oven
signals and flashes
r
1=
1
“End”. Open the door
~ 1~[ ~[
and remove the popcorn.
How to Adjust the Sensor Popcorn Program to Provide a Shorter or Longer Cook Time
If your favorite popcorn is not completely popped,
there is a simple adjustment you can make.
Touch the SENSOR
POPCORN pad. (The
oven
will start
E
1:(1—11=( +
immediately.) Then touch
I ~fl
number pad 9. A plus
sign will appear on the
display beside the word “POP”. The plus sign
indicates 20 seconds more cooking time is being
provided.
If your favorite popcorn is overcooked, there is a
simple adjustment you can make.
Touch the SENSOR
POPCORN pad. (The
oven will start
E
I—1l—( 1=1-
immediately.) Then touch
r ~[ I
number pad 1. A minus
sign will appear on the
display beside the word “POP”. The minus sign
indicates 20 seconds less cooking time is being
provided.
Questions and Answers
Q. I opened the door to check on the popcorn and
Q. Can I use regular popcorn with the Sensor
“Error” appeared on the display. Why?
Popcorn feature in my microwave oven?
A. The Sensor Popcorn program first detects steam
A. No. This automatic function is designed to be used
and then switches to Micro Cook. If you open the
only with prepackaged microwave popcorn.
door while “POP” is displayed, “Error” will appear.
Close the door, touch
CLEAWOFF and begin
Q. When I touched the POPCORN pad, the oven
again. You may open the door when “End” appears
signalled and “HOT” appeared in the display,
and the feature would not operate. Why?
on display.
A. If the temperature inside the oven is greater than
200°, the sensor will not operate properly as the oven
does not allow the sensor cooking feature to be used.
SENSOR BEVERAGE
The Sensor Beverage program makes it simple to
heat a cup of hot chocolate or other beverage. Use a
cup that has no metal decoration and is
microwave-
safe (refer to the Microwaving Tips section).
n
Touch SENSOR BEVERAGE pad. No
&~~& need to touch START, the oven will start
m-mediately.
The oven will signal and turn off automatically
when finished.
CAUTION: Beverages heated with the Sensor
Beverage feature may be quite hot. Remove the
container with care.
19

GE JEB1090 Specifications

General

Brand	GE
Model	JEB1090
Category	Microwave Oven
Language	English