GE LOGIQ V5

GE LOGIQ V5/LOGIQ V3
D
IRECTION 5496012-100, REVISION 3 BASIC SERVICE MANUAL
Chapter 3 - System Setup 3 - 27
Section 3-10Software Version check out
3-10-1 Functional Check-out
1.) Power on LOGIQ V5/LOGIQ V3 scanner and wait until system booting to main screen.
2.) Press Utility key on control panel.
3.) Choose the About button on the right.
4.) Check whether “Software version” is the right version for use.
Figure 3-20 About and Software version