© 2010 by General Electric Company. All rights reserved. 2049809-001 Rev B 23
Chapter4: Installation and Setup
Replacing the Plug Attachments
Perform the following steps to replace the plug attachments.
Step Instructions
Instructions to replace the plug attachment:
1. Press and hold the Release button as shown
in gure 1 and rotate the plug attachment anti-
clockwise to release it from the adaptor.
2. Place the desired plug attachment on the adaptor.
Press and hold the Release button as shown in
gure 2 and rotate clockwise to attach the plug to
the adaptor.
Attaching the Carrying Strap
Perform the following steps to attach the carrying strap.
Step Instructions
Instructions to attach the carrying strap:
1. Secure the metal clips at each end of the carrying
strap to the belt attachment loops on each side of
the transmitter as shown in gures 1 and 2.
2. Adjust the strap length as per mother’s comfort
for easy carrying.
To Next Page
Loading...
Need help?
General
