© 2010 by General Electric Company. All rights reserved. 2049809-001 Rev B 33
Chapter 5: Maintenance and Cleaning
Maintenance
This section describes general care and cleaning instructions for the Mini Telemetry System.
Storage
Place the transmitter on the placeholder of the receiver when it is not used.
NOTE: The transmitter can be charged when placed on the receiver.
CAUTION:
Do not connect the transducer cables to the transmitter when it is placed on the receiver, this may cause the
transmitter to fall o the receiver.
Use care while carrying the receiver and transmitter.
General Cleaning Precautions
NOTE: Refer to your monitor’s operator manual for cleaning instructions for the monitor and transducers.
CAUTION
SHOCK—Unplug the fetal or maternal/fetal monitor and the receiver from the AC power source and detach all
accessories. Do not immerse accessories in any liquid. Do not use abrasive cloth or cleaners on the monitor, the
receiver, the transmitter, or any accessories. Do not spray cleaning solutions into the vents.
Cleaning the Transmitter and Receiver
1. Wipe any uids from the surface of each unit.
2. Dampen a soft cloth with cleaning solution and gently rub soiled area until clean.
3. Dry with a soft, dry cloth.
To Next Page
Loading...
Need help?
General
