What to do if my GE PCGS960 Ranges oven door will not open?
If the oven door of your GE Range won't open or the LOCKED light is on, the oven door is locked because the temperature inside the oven has not dropped below the locking temperature. Press the Cancel/Off pad and allow the oven to cool below the locking temperature.
What to do after a power outage and clock flashes on my GE Ranges?
If there was a power outage and the clock on your GE Range is flashing, reset the clock. If the oven was in use, you must reset it by pressing the Cancel/Off pad, setting the clock and resetting any cooking function.
What to do if my GE PCGS960 Ranges oven and/or display appears not to work?
First, check if a fuse in your home may be blown or the circuit breaker tripped and replace the fuse or reset the circuit breaker if needed. Also, the oven controls may be improperly set, so please, check the settings. Verify, that the oven is not in Sabbath Mode. Finally, check if the clock is turned off.
What to do if my GE Ranges oven door will not open or LOCKED light is on when you want to cook?
The oven door is locked because the temperature inside the oven has not dropped below the locking temperature. Press the Cancel/Off pad and allow the oven to cool below the locking temperature.
Why is my GE PCGS960 oven not clean after a clean cycle?
Oven was heavily soiled. Clean up heavy spillovers before starting the clean cycle. Heavily soiled ovens may need to self-clean again or for a longer period of time.
How to reset the clock on GE PCGS960 after power outage?
Reset the clock. If the oven was in use, you must reset it by pressing the Cancel/Off pad, setting the clock and resetting any cooking function.
What to do if my GE Ranges is excessively smoking during the clean cycle?
If there's excessive smoking during the clean cycle of your GE Range, it's likely due to excessive soil or grease. Press the Cancel/Off pad, open windows to clear the smoke, wait for the LOCKED light to go off, wipe up the excess soil, and then reset the clean cycle.
Why does 'LOCK DOOR' flash on my GE Ranges display?
If "LOCK DOOR" flashes in the display of your GE Range, the self-clean cycle has been selected but the door is not closed. Close the oven door.
What to do if my GE Ranges oven and display appear not to work?
If your GE Range oven or display isn't working, check if a fuse in your home is blown or the circuit breaker tripped and replace the fuse or reset the circuit breaker. Also, verify that the oven is not in Sabbath Mode and that the clock is turned on. If not, see the Settings section.
Why is there excessive smoking during GE Ranges broiling?
The food is too close to burner element. Lower the rack position of the food.
General| Fuel Type | Gas |
|---|---|
| Cooktop Surface | Stainless Steel |
| Cooktop Material | Stainless Steel |
| Burners | 5 |
| Convection | Yes |
| Self-Cleaning | Yes |
| Color | Stainless Steel |
| Number of Burners | 5 |
| Weight | Not found |
To Next Page
