To Next PageTo Next PageWhy does my new GE PC2B940SEJSS not cook like my old one?
Your new GE Ranges may cook differently than your old oven because it has a different cooking system. During the first few uses, carefully follow the recipe times and temperatures, and use the rack positions recommended in the Cooking Guide. If you still think your new oven is too hot or too cold, you can adjust the temperature yourself to meet your specific cooking preference.
What to do if my GE PC2B940SEJSS oven and/or display appears not to work?
If your GE Ranges oven and/or display appears not to work, check the following: First, verify that a fuse in your home hasn't blown or a circuit breaker hasn't tripped; replace the fuse or reset the breaker if needed. Next, ensure the oven controls are properly set. Also, check if the oven is accidentally in Sabbath Mode. Finally, check if the clock is turned off and reset it if necessary.
What to do if my GE PC2B940SEJSS Ranges oven door will not open or the LOCKED light is on?
If your GE Ranges oven door will not open or the LOCKED light is on when you want to cook, it's likely because the oven door is locked. This happens because the temperature inside the oven hasn't dropped below the locking temperature. To resolve this, press the Cancel/Off pad and allow the oven to cool until the temperature is below the locking threshold.
How to reset clock after power outage on GE PC2B940SEJSS?
After a power outage or surge, your GE Ranges clock may flash. Reset the clock. If the oven was in use, you must reset it by pressing the Cancel/Off pad, setting the clock, and resetting any cooking function.
Why is my GE Ranges oven temperature too hot or too cold?
If your GE Ranges oven temperature is too hot or too cold, it may need adjustment. See the Special Features section for instructions on how to adjust the oven temperature.
Why is there excessive smoking during the clean cycle of my GE PC2B940SEJSS Ranges?
Excessive smoking during the clean cycle of your GE Ranges is often due to excessive soil or grease. To address this, press the Cancel/Off pad, open the windows to ventilate the room, and wait until the LOCKED light turns off. Then, wipe up the excess soil and reset the clean cycle.
Why surface burners light but bake and broil burners do not on my GE PC2B940SEJSS Ranges?
If the surface burners light but the bake and broil burners do not on your GE Ranges, the gas to the oven burners may have been shut off. The oven gas shut-off is located on the gas regulator near the gas line attachment to your range. Locate it and lift the lever.
How to fix GE Ranges top burners that do not burn evenly?
If the top burners on your GE Ranges do not burn evenly, ensure the burner caps are seated correctly. Also, burner slots on the side of the burner may be clogged, remove the burners for cleaning.
What to do if my GE PC2B940SEJSS Ranges food does not broil properly?
If food is not broiling properly in your GE Ranges, first ensure you've selected the appropriate broil mode. Next, verify you're using the correct rack position. Use a pan specifically designed for broiling. If using aluminum foil on the broil pan, wrap it tightly and add slits conforming to those in the pan to allow grease to drain.
Why is my GE PC2B940SEJSS oven not clean after a clean cycle?
If your GE Ranges oven is not clean after a clean cycle, it could be due to improperly set oven controls or because the oven was heavily soiled. Consult the Cleaning the Oven section for proper control settings. Clean up heavy spillovers before starting the clean cycle. For heavily soiled ovens, consider running the self-clean cycle again or for a longer period.
General| Brand | GE |
|---|---|
| Model | PC2B940SEJSS |
| Fuel Type | Gas |
| Number of Burners | 4 |
| Self-Cleaning | Yes |
| Wi-Fi Connectivity | No |
| Color | Stainless Steel |
| Burners | 4 |
| Convection | Yes |
| Width | 30 in |
| Type | Slide-In |
Crucial safety guidelines and warnings for operating the appliance.
Instructions for securing the range to prevent tipping hazards.
Essential safety practices for using the appliance.
Precautions against flammable items and fire safety procedures.
Specific safety guidelines for operating the cooktop and oven surfaces.
Solutions for problems like incorrect cooking, temperature issues, and sounds.
Troubleshooting guide for oven not working, self-clean, and power issues.
