GE PFD87 User Manual (English)

Questions and Answers:

J
Jared LongAug 21, 2025
Why is my GE PFD87 running but not heating?
- F
  Frank HoltAug 21, 2025
  If your GE dryer is tumbling but not heating, consider these potential causes: * Blown fuse/tripped circuit breaker: Check the building’s fuse/circuit breaker box and replace both fuses or reset both breakers. Some electric dryers use 2 fuses/breakers, so ensure both are operating. * Gas service is off (gas models only): Make sure the gas shutoff at the dryer and the main shutoff are fully open. * LP gas supply tank is empty or there has been a utility interruption of natural gas (gas models only): Refill or replace the tank. The dryer should heat when utility service is restored. * No heat temperature selected: Select another heat setting.
R
Robert LeeAug 22, 2025
What to do if my GE Dryer doesn't start?
- L
  Luis BurnettAug 22, 2025
  If your GE dryer isn't starting, here are a few things to check: * Control panel is “asleep”: Press the Power button to activate the control panel. * Dryer is unplugged: Ensure the dryer plug is completely pushed into the outlet. * Fuse is blown/circuit breaker is tripped: Check the building’s fuse/circuit breaker box and replace the fuse or reset the breaker. Note that some electric dryers use two fuses/breakers, so make sure both are operating. * Dryer was accidentally paused when starting Delay Dry: If the light on the Start/Pause pad is flashing, the dryer is paused. Press Start/Pause to restart the countdown.
J
joshua92Aug 25, 2025
How to prevent lint on clothes from my GE PFD87 Dryer?
- J
  Jill PowellAug 25, 2025
  To prevent lint on clothes when using your GE dryer, consider the following: * Lint filter is full: Clean the lint screen before each load. * Improper sorting: Sort lint producers (like chenille) separately from lint collectors (like corduroy). * Static electricity: Static can attract lint. See suggestions in this section under Static occurs. * Overloading: Separate large loads into smaller ones. * Paper, tissue, etc., left in pockets: Empty all pockets before laundering clothes.
B
Briana PatelAug 26, 2025
How to stop my GE PFD87 from shaking and making noise?
- J
  jenniferwatkinsAug 27, 2025
  If your GE dryer is shaking or making noise, it might be sitting unevenly. Move the dryer to an even floor space, or adjust the leveling legs as necessary until it is stable.
A
ambersuttonAug 28, 2025
What to do if clothes are still damp after using the Dry setting on my GE PFD87 Dryer?
- Z
  zjenningsAug 28, 2025
  If your clothes are still damp after using the Dry setting on your GE dryer, it could be because: * The load consists of a mixture of heavy and light fabrics: When combining heavy and light fabrics in a load, choose More Dry. * The exhaust system is blocked: Inspect and clean the exhaust system.
B
Brian GriffinAug 30, 2025
Why are collars and waistbands still wet after using my GE PFD87 Dryer?
- J
  jennifergarciaAug 30, 2025
  If collars and waistbands are still wet at the end of a cycle in your GE dryer, it may be because the dryness monitor senses that the body of the clothes is dry. Choose QUICK DRY or TIMED DRY to dry damp collars and waistbands. In the future, when drying a load with collars and waistbands, choose More Dry.
I
iolsenAug 31, 2025
Why does my GE PFD87 display 00 in Time Remaining while running?
- K
  Kelly JimenezAug 31, 2025
  If your GE dryer is running but displays '00' in Time Remaining, this could be due to: * The Wrinkle Care option being chosen: During extended tumbling with this option, the time remaining is not displayed. This lasts approximately 60 minutes. * A full lint filter: Clean the lint filter, dry a load on an automatic cycle, and verify that the light turns off. * Improper or obstructed ducting: Check the Installation Instructions to ensure correct dryer venting. Ensure ducting is clean, free of kinks, and unobstructed. Also, check if the outside wall damper operates easily. Dry a load on an automatic cycle and verify that the light turns off.
G
garciamichaelSep 2, 2025
How to reduce static in my GE PFD87?
- R
  rebecca89Sep 2, 2025
  To reduce static in your GE dryer: * Use a fabric softener. Bounce® Fabric Conditioner Dryer Sheets have been approved for use in all GE Appliances dryers when used in accordance with the manufacturer’s instructions. * Avoid overdrying by adjusting the setting to Less Dry or Damp. * Be aware that synthetics, permanent press, and blends can cause static; try using a fabric softener.
T
Timothy KingSep 4, 2025
Why does my GE Dryer shut off quickly and leave clothes wet?
- E
  Emily GonzalesSep 4, 2025
  If your clothes are still wet and your GE dryer shuts off after a short time, consider these possibilities: * The door was opened mid-cycle, and a new load was put in without selecting a new cycle: A dry cycle must be re-selected each time a new load is put in. * The load is small: When drying 3 items or less, choose QUICK DRY or TIMED DRY. * The load was already dry except for collars and waistbands: Choose QUICK DRY or TIMED DRY to dry damp collars and waistbands. In the future, when drying a load with collars and waistbands, choose More Dry. * The dryer is not level: Move the dryer to an even floor space or adjust the leveling legs as necessary until even.
V
Vanessa MartinSep 5, 2025
Why are there greasy spots on clothes after drying in my GE PFD87 Dryer?
- M
  Mark MeyersSep 6, 2025
  Greasy spots on clothes after drying in your GE dryer may be due to: * Improper use of fabric softener: Follow the directions on the fabric softener package. * Drying dirty items with clean ones: Use your dryer to dry only clean items. Dirty items can stain clean items and the dryer. * Clothes were not completely clean: Sometimes stains which cannot be seen when the clothes are wet appear after drying. Use proper washing procedures before drying.

GE PFD87 Specifications

General

Appliance Category	Dryer
Brand	GE
Model	PFD87
Type	Front Load
Control Type	Electronic
Energy Star Certified	No
Fuel Type	Electric
Color	White
Voltage	240 V
Amperage	30 A
Drum Material	Stainless Steel
Number of Temperature Settings	5
Wrinkle Prevention Option	Yes
End of Cycle Signal	Yes
Weight	130 lbs

Summary

Dryer Safety Information and Precautions

Dryer Operation Safety Guidelines

Essential safety warnings, precautions, and instructions for safe dryer operation.

Using the GE Appliances Dryer

GE Dryer Getting Started Guide

Initial setup steps, WiFi connection, and quick start guide for operating the dryer.

GE Dryer Control Panel Features

Detailed explanation of the dryer's control panel layout, buttons, and display indicators.

Understanding Dryer Indicator Lights

Explanation of what the WiFi, Check Filter, Check Vent, and AI indicators signify.

GE Dryer Cycle Descriptions

Comprehensive guide to available drying cycles and their specific uses and features.

GE Dryer Settings Explained

Details on adjusting dryness levels, temperature, and time for optimal drying.

GE Dryer Operation Options Guide

Explanation of additional features like Reduce Static, Damp Alert, Wrinkle Care, ecoDry, and Sound.

GE Dryer Bluetooth Pairing and Control

Instructions for pairing the dryer with a washer and using remote dryer control features.

Loading the GE Dryer

Dryer Loading and Sorting Tips

Best practices for sorting laundry and loading the dryer for efficient performance.

GE Dryer Drying Rack Installation and Use

Instructions for installing and using the optional drying rack for delicate items.

GE Dryer Care and Cleaning Guide

Dryer Interior, Exterior, and Lint Filter Care

Procedures for cleaning the dryer's interior, exterior surfaces, and the lint filter.

GE Dryer Drum Cleaning Instructions

Specific cleaning methods for stainless steel and aluminized steel dryer drums.

GE Dryer Installation Instructions

GE Dryer Installation: Before You Begin

Critical preliminary steps, safety notes, and installer/consumer responsibilities before installation.

GE Dryer Installation Requirements and Clearances

Guidelines for alcove, closet, and general clearances, plus mobile home installation standards.

Connecting Steam Dryer Water Hoses

Step-by-step instructions for connecting water inlet hoses to the dryer for steam functionality.

GE Dryer Gas Connection Guide

Tools, materials, and steps for connecting a gas dryer, including gas supply and safety requirements.

GE Dryer Electric Connection Guide

Tools, materials, and steps for connecting an electric dryer via power cord or direct wire.

GE Dryer Venting and Exhaust Installation

Instructions for properly venting the dryer, including duct types, lengths, and connections.

GE Dryer Final Setup and First Use

Steps for leveling the dryer, plugging it in, and performing the initial power-on and start-up.

GE Dryer Door Swing Reversal Instructions

Step-by-step guide to change the dryer door swing direction for optimal placement.

GE Dryer Stacking Installation Guide

Instructions and kit details for safely stacking the dryer on top of a compatible washer.

GE Dryer Troubleshooting Guide

Troubleshooting Common Dryer Operational Problems

Solutions for issues like shaking, noise, not starting, and incomplete drying cycles.

Troubleshooting Dryer Drying and Fabric Issues

Addressing problems with wrinkles, shrinkage, static, and wet clothes after drying.

Troubleshooting GE Dryer Steam Cycles

Specific guidance for issues related to steam cycles, including condensation and performance.

GE Dryer Limited Warranty Information

GE Dryer Warranty Terms and Exclusions

Details on what the dryer warranty covers, what it excludes, and terms for US and Canada.

GE Dryer Consumer Support Resources

GE Dryer Support, Service, and Parts

How to get assistance, schedule service, order parts, and find warranty information.

Related product manuals