What causes excessive smoke when broiling in my GE Ranges?
If your GE Ranges are experiencing excessive smoking during broiling, it's likely because the food is too close to the burner element. Lower the rack position of the food to increase the distance from the burner.
Why is my food not broiling properly in my GE PGB935?
If your GE Ranges food is not broiling properly, make sure you have selected the appropriate broil mode. Check the Cooking Guide for the correct rack position. Use cookware specifically designed for broiling. If using aluminum foil on the broil pan, make sure it's properly fitted and has slits to drain grease.
Why is my food not baking properly in my GE PGB935 oven?
If your GE Ranges oven isn't baking properly, there might be several reasons. The oven controls could be set incorrectly. Also, the rack position might be wrong, or the rack might not be level. You may be using the wrong cookware or cookware of an improper size. Finally, the oven temperature might need adjustment. Consult the Cooking Modes section, Cooking Guide, Cookware section, and Settings section for more details.
How to fix food that does not bake properly in GE PGB935?
If food isn't baking properly in your GE Ranges, several factors could be the cause. First, ensure the oven controls are set correctly, referring to the Cooking Modes section. Check that the rack position is correct and level, consulting the Cooking Modes section and Cooking Guide. Also, verify you're using the correct cookware of the proper size, as detailed in the Cookware section. Finally, the oven temperature may need adjustment; see the Settings section for instructions.
Why is there a strong “burning” or “oily” odor emitting from the vent of my new GE PGB935?
A strong “burning” or “oily” odor from the vent of your new GE Ranges is normal and will disappear over time. To speed up the process, set a self-clean cycle for a minimum of 3 hours. See the Cleaning the Oven section. This is temporary.
Why are the burner flames on my GE PGB935 very large or yellow?
If the burner flames on your GE Range are very large or yellow, it indicates an improper air to gas ratio. If your range is connected to propane gas, contact the technician who installed your range or made the conversion.
What does "F— and a number or letter" flash mean on GE Ranges?
If you see "F— and a number or letter" flashing in the display of your GE Ranges, it indicates a function error code. Press the Cancel/Off pad and allow the oven to cool for one hour. Then, put the oven back into operation. If the error code repeats, call for service.
What to do if my GE PGB935 Ranges oven and/or display appears not to work?
If your GE Ranges oven and/or display isn't working, there are several potential causes. First, check your home's fuse box or circuit breaker and replace the fuse or reset the breaker if necessary. Also, ensure the oven controls are properly set. The oven might be in Sabbath Mode, or the clock may be turned off. Refer to the Settings section to resolve this.
Why is my GE PGB935 oven not working?
If your GE Ranges oven and/or display appear not to work, check if a fuse in your home has blown or the circuit breaker has tripped and replace the fuse or reset the circuit breaker. Also, ensure the oven controls are properly set and that the oven is not in Sabbath Mode. Lastly, check if the clock is turned off.
How to unlock the oven door on my GE Ranges?
If your GE Ranges oven door won't open and the LOCKED light is on, it means the oven temperature hasn't cooled down enough. Press the Cancel/Off pad and wait for the oven to cool below the locking temperature.
General| Number of Burners | 5 |
|---|---|
| Self-Cleaning | Yes |
| Convection Oven | Yes |
| Wi-Fi Connectivity | Yes |
| Color | Stainless Steel |
| Fuel Type | Gas |
| Type | Gas |
| Oven Capacity | 5.6 cu ft |
| Width | 30 inches |
| BTU per Burner | 18, 000 BTU |
To Next Page
