Why GE PGB935 oven light does not work?
If your GE Ranges oven light does not work, the light bulb may be loose or defective. Try tightening or replacing the bulb. See the Maintenance section for instructions on how to replace the bulb.
Why is there excessive smoking during the clean cycle of my GE PGB935 Ranges?
Excessive smoking during the clean cycle of your GE Ranges usually indicates excessive soil or grease. Press the Cancel/Off pad, open windows to vent the smoke, and wait for the LOCKED light to turn off. Wipe up the excess soil and then reset the clean cycle.
Why won't the burners light on my GE Ranges?
If your GE Ranges burners do not light, ensure the range is properly plugged into a grounded outlet. Also, check that the gas supply is connected and turned on. Check the fuse or circuit breaker, and ensure burner parts are correctly replaced. Clear any clogs from burner slots or the lighter port, and polish the electrode tip if there's food residue.
How to unlock the oven door on my GE Ranges?
If your GE Ranges oven door won't open and the LOCKED light is on, it means the oven temperature hasn't cooled down enough. Press the Cancel/Off pad and wait for the oven to cool below the locking temperature.
Why is my GE PGB935 oven not working?
If your GE Ranges oven and/or display appear not to work, check if a fuse in your home has blown or the circuit breaker has tripped and replace the fuse or reset the circuit breaker. Also, ensure the oven controls are properly set and that the oven is not in Sabbath Mode. Lastly, check if the clock is turned off.
What to do if my GE PGB935 Ranges oven and/or display appears not to work?
If your GE Ranges oven and/or display isn't working, there are several potential causes. First, check your home's fuse box or circuit breaker and replace the fuse or reset the breaker if necessary. Also, ensure the oven controls are properly set. The oven might be in Sabbath Mode, or the clock may be turned off. Refer to the Settings section to resolve this.
Why don't my GE Ranges burners light?
If your GE Range burners do not light, ensure the electrical plug is properly inserted into a grounded outlet. Also, make sure the gas supply is connected and turned on. Check for blown fuses or tripped circuit breakers in your home and replace or reset them if necessary. Verify burner parts are correctly replaced after cleaning, and clean any clogged burner slots or the lighter port. If there's food residue on the electrode, lightly polish the flat tip with a nail file or sandpaper until shiny.
What to do if GE Ranges oven door will not open or LOCKED light is on?
If your GE Ranges oven door will not open or the LOCKED light is on when you want to cook, it means the oven door is locked because the temperature inside the oven has not dropped below the locking temperature. Press the Cancel/Off pad and allow the oven to cool below the locking temperature.
What to do if my GE Ranges oven is still dirty after self-cleaning?
If your GE Ranges oven isn't clean after a cleaning cycle, it might be due to improperly set oven controls or a heavily soiled oven. Refer to the Cleaning the Oven section for control settings. For heavily soiled ovens, clean up any significant spills before starting the cleaning cycle. You may need to run the self-clean cycle again or for a longer duration.
Why does my new GE PGB935 Ranges smell like it's burning?
If your GE Ranges are emitting a strong burning or oily odor from the vent, this is normal for a new oven and will fade over time. To speed up the process, run a self-clean cycle for at least 3 hours. This is only temporary.
General| Number of Burners | 5 |
|---|---|
| Self-Cleaning | Yes |
| Convection Oven | Yes |
| Wi-Fi Connectivity | Yes |
| Color | Stainless Steel |
| Fuel Type | Gas |
| Type | Gas |
| Oven Capacity | 5.6 cu ft |
| Width | 30 inches |
| BTU per Burner | 18, 000 BTU |
To Next Page
