ā 28 ā
Drawer Vertical Adjustment
Note: This following instruction is for adjusting the
lower drawer front vertically to meet appearance
needs of the customer. Both the right- and left-side
of the drawer front can be adjusted independently.
To adjust the drawer front vertically:
1. Remove the freezer basket. (See Freezer Basket,
this section.)
2. Loosen 3 full turns the four T-30 Torx screws on
the side that needs to be adjusted. Do one side
at a time if both need adjustment.
3. Turn the Phillips-head adjustment
screw clockwise to lower the drawer or
counterclockwise to raise the drawer to the
desired position. Once positioned, tighten the
four T-30 Torx screws.
Loosen
Loosen
Loosen
Loosen
Adjustment Screw
Left Side Bracket Shown
Drawer Panel Removal
To remove the drawer panel:
1. Remove the freezer basket. (See Freezer Basket,
this section.)
2. Remove the Phillips-head adjustment screws (1
on each side).
3. Remove the four T-30 Torx screws (4 on each
side) that attach the drawer panel to each
drawer bracket.
Remove
Remove
Remove
Remove
Remove
Drawer Bracket
(Continued next page)
To Next Page
Loading...
