– 9 –
Control Features
About the controls with temperature settings.
Note: The refrigerator is shipped with protective fi lm covering the temperature controls. If this fi lm was not
removed during installation, remove it now.
The temperature controls are preset in the factory at 37°F for the refrigerator compartment and 0°F for the
freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended settings.
The temperature controls can display both the SET temperature as well as the actual temperature in the
refrigerator and freezer. The actual temperature may vary slightly from the SET temperature based on usage
and operating environment.
Setting either or both controls to OFF stops cooling in both the freezer and refrigerator compartments, but
does not shut off electrical power to the refrigerator.
To turn the cooling system off, tap the refrigerator W
ARMER touch pad until the temperature display fl ashes
and beeps. Then tap the freezer W
ARMER touch pad until the display indicates OFF and beeping stops.
To turn the cooling system on, tap the refrigerator C
OLDER touch pad twice. The display will also show the
refrigerator and freezer temperature settings.
(Continued next page)
To Next Page
Loading...
