– 39 –
Notch
Cover
LED Board
Disconnect
Note: The fresh food and freezer LED light
assemblies are removed in the same manner.
Each LED assembly consists of an LED board
attached to the inside of a cover. To access the
LED board, insert a fl at blade screwdriver under
the cover's notched end and gently pry out until it
releases from the compartment wall. The LED board
can then be unsnapped from the cover and the wire
harness disconnected.
Freezer LED
Fresh Food LEDs
Notch
Cover
Freezer LED Schematic
J4-3 = LED Ground
J4-2 = 13 VDC
J3-5 = LED Enable
13.6V RED
(COMMON)
FOR DD MODELS
RED
BROWN
J11(TAB-4)
MAIN CONTROL BOARD
J4-3 J4-2
BO
TT
OM DRAWER
FZ LIGHT SWITCH
TO
P DRAWER
FZ LIGHT SWIT
CH
J7-7
RED
PINK
J3-5
RED
FZ LED
LIGHTBOARD
ASM
RED
RED
PINK
BLUE
BLUE
To Next Page
Loading...
