GE PS960 - User Manual

Questions and Answers

C
Christina MolinaAug 31, 2025
How to reset the display on my GE Ranges after a power failure?
- B
  brenda45Aug 31, 2025
  If the display on your GE Ranges is flashing, it indicates a power failure. Reset the clock.
P
Paul GraySep 10, 2025
How to remove scratches on GE PS960 cooktop glass surface?
- S
  Scott ContrerasSep 10, 2025
  If you see scratches (that may appear as cracks) on your GE Ranges cooktop glass surface, please note that scratches are not removable, but tiny scratches will become less visible over time with cleaning. To prevent scratches, use recommended cleaning procedures and ensure cookware bottoms are clean and smooth before use. Avoid sliding cookware across the cooktop.
L
lparkerAug 30, 2025
Why is there excessive smoking during the clean cycle of my GE PS960 oven?
- L
  luis48Aug 30, 2025
  Excessive smoking during the clean cycle of your GE Ranges oven is likely due to excessive soil or grease. Press the Cancel/Off pad, open windows to vent the smoke, wait for the LOCKED light to turn off, wipe up the excess soil, and then reset the clean cycle.
C
Connie LoveSep 12, 2025
Why does the display go blank on my GE PS960?
- P
  Paul WilsonSep 12, 2025
  If the display on your GE Ranges goes blank, check the fuse box or circuit breaker in your home and replace the fuse or reset the breaker if needed. Also, check if the clock is turned off or if the oven is in Sabbath Mode.
M
Michelle SmithSep 12, 2025
What does “F— and a number or letter” flashing in the display of my GE Ranges mean?
- C
  cortezamySep 12, 2025
  If you see “F— and a number or letter” flashing in the display of your GE Ranges, you have a function error code. Press the Cancel/Off pad and allow the oven to cool for one hour, then put the oven back into operation. If the function code repeats, disconnect all power to the oven for at least 30 seconds and then reconnect power. If the function error code repeats, call for service.
H
henryedwardSep 15, 2025
Why is there a strong odor coming from my GE PS960 Ranges?
- T
  Tanya KleinSep 16, 2025
  If you notice a strong odor from your GE Ranges, an odor from the insulation around the inside of the oven is normal for the first few times the oven is used. This is temporary and will go away after several uses or a self-clean cycle.
C
Cheryl ConnerSep 23, 2025
Why does my GE Ranges display prompts for Probe Temperature?
- G
  George DaughertySep 23, 2025
  If your GE Ranges displays prompts for Probe Temperature, this is reminding you to enter a probe temperature after plugging in the probe. Enter a probe temperature.
A
Adam DominguezAug 27, 2025
What to do if GE Ranges oven will not steam clean?
- B
  Brianna MartinezAug 27, 2025
  If your GE Ranges oven will not steam clean, allow the oven to cool to room temperature and reset the controls if the display flashes HOT. Ensure the oven controls are properly set, and make sure you close the door to start the steam clean cycle.
T
Tyler GentryAug 26, 2025
What to do if surface units do not work properly on GE PS960 Ranges?
- K
  kathrynstewartAug 26, 2025
  If the surface units on your GE Ranges aren't working properly, check your home's fuse box or circuit breaker and replace the fuse or reset the breaker if necessary. Also, ensure that the cooktop controls are correctly set for the surface unit you're using.
K
Kendra MedinaAug 25, 2025
How to fix GE PS960 surface units that won't maintain a rolling boil?
- E
  ericreyesAug 26, 2025
  If the surface units on your GE Ranges aren't maintaining a rolling boil or cooking quickly enough, it might be due to using improper cookware. Ensure you're using flat pans that match the diameter of the surface unit. Also, in areas with low voltage, covering the pan with a lid can help achieve the desired heat faster.