20
Load
Sensing
Washer agitates to determine if water level (as selected by con-
sumer) is appropriate for actual load size and type of clothes.
•After minimum water level is attained, washer senses if load is
greater than 17lbs (impeller only goes back and forth).
• Basket is spin intermittently by pulses (3 times CCW, then 3 times
CW) and water is injected via the dispenser, dispensing soap.
•If load is less than 17lbs, agitation can start after fill is complete to
desired level.
Fill to
selected
level
After load sensing, washer fills to desired level
• Washer fills to level selected by consumer or greater level if load
sensing determines selected load size is not sufficient.
Agitation
Washer agitates according to settings chosen by consumer,
between 14 and 18 minutes.
Wash Cycle Progression (cont.)
To Next Page
Loading...
