Need help?Do you have a question about the GE PTAN9150MWW and is the answer not in the manual?
General| Brand | GE |
|---|---|
| Model | PTAN9150MWW |
| Type | Top Load |
| Color | White |
| Energy Star Qualified | Yes |
| Number of Wash Cycles | 12 |
| Wash Action | Agitator |
| Spin Speed | 700 RPM |
| Water Temperature Settings | 5 |
| Control Type | Electronic |
| Steam Function | No |
| Sanitize Cycle | Yes |
| Voltage | 120V |
| Frequency | 60 Hz |
| Dimensions | 44 in. H x 27 in. W x 27 in. D |
| Dispenser | Fabric Softener |
| Water Level Settings | Auto Sensing |
To avoid personal injury, disconnect power before servicing this product.
Ensure grounding wires, screws, straps, clips, nuts, or washers are returned to their original position.
Explains the alphanumeric code used to identify washer models and features.
Details the codes for Brand, Config, Product Type, Key Features, Series, Color, and Year.
Compares key features like wash action, controls, and service modes between old and new washers.
Basic steps for operating the washer, including adding detergent and clothes.
How to adjust wash cycles based on soil level and load size for optimal performance.
Details on choosing wash cycles and setting water temperatures for different fabric types.
Explanation of spin levels for wrinkle reduction and proper fabric care.
How to use delayed start and understand the estimated time remaining display.
Details on Deep Rinse, Wash/Rinse only, and end-of-cycle signal functionality.
Guide to starting cycles and the function of the lid lock safety mechanism.
Details on required standpipe height and connection for proper drainage.
Requirements for hot and cold water faucets, pressure, and temperature.
Outline of parts covered by warranty, their periods, and items not covered.
Explanation of the limitations on implied warranties like merchantability or fitness.
Instructions for adding bleach, detergent, and fabric softener to their respective compartments.
Tips for loading clothes evenly and avoiding restrictions like blankets across the Infusor.
A table showing typical quantities for shirts, pants, towels, and other items.
Tables detailing water consumption by load size and cycle duration for various programs.
Introduction to the Infusor system, HE detergent use, and loading advice.
Guidance on understanding common consumer comments about Infusor washers.
Solutions for lint accumulation and troubleshooting insufficient water fill.
Tips for improving wash consistency and removing spots from clothing.
Strategies to reduce wrinkles and care for clothes during washing and spinning.
Troubleshooting water temperature concerns, vibration, and overly wet clothes.
Explanation of normal tub or basket movement when the washer is idle.
How to test water valves using resistance and a 120 Volt test cord.
How to test the drain pump using resistance and a 120 Volt test cord.
Procedure for testing the wax motor using a 120 Volt test cord.
Details the motor's wiring diagram and required resistance measurements.
Step-by-step instructions to enter the washer's service mode for diagnostics.
Procedure to exit service mode and return the washer to normal operation.
To Next Page