51
HOW TO CHECK SOME COMPONENTS
You can check different components from the plug underneath the top of the washer.
1- Lift up the top.
2- Unplug the main connection.
3- Do the test.
You can check the wax motor, drain pump, motor and the speed control. The
readings obtained are resistances (Ώ).
1 2 3
4 5
6 7 8
1 = White
2 = White / Black
3 = Yellow
4 = Black
5 = Pink
6 = Blue / White
7 = Red / White
8 = Red
Components Wire location & resistance Colors
Wax Motor
Between 2 & 1 =.99KLΏ
White/Black&White
Drain pump
Between 8 & 1 =15 Ώ
Red&White
Motor (1 coil)
Between 3 & 8 = 5 Ώ
Yellow&Black
Motor (1 coil)
Between 6 & 8 = 5 Ώ
Blue/White&Black
Motor (both coils)
Between 6 & 3 = 10 Ώ
Blue/White&Yellow
Speed sensor
Between 7 & 5 = 39 KΏ
Red/White&Pink
Reverse the polarity from
your multimeter you will
read infinite
To Next Page
Loading...
